Back to Blog

Cost Realism Analysis: How the Government Checks Your Price

The government has three ways to test a proposed price: price analysis, cost analysis and cost realism. On cost-reimbursement contracts, a price that is too low can be replaced with a higher probable cost.

Sana Rehman marks a cost proposal page labelled Labor, Indirect costs and Fee with the note "Realistic?" while Sumera Khan points to a staffing plan on a laptop and Haroon Haider looks on, beside the headline Cost Realism Analysis: How the Government Checks Your Price.
Sana Rehman/ Co-Founder and VP, Resources, Aliff Solutions
November 14, 20266 min read
Share:

Cost realism analysis is the test that decides whether your price is believable, not just whether it is low. The government has three ways to examine a proposed price, and they answer different questions. On some contracts the evaluators can conclude your number is too low, replace it with a higher one, and evaluate you on that instead.

In short

  • The goal is a fair and reasonable price, not the lowest one. FAR 15.404-1(a): "The objective of proposal analysis is to ensure that the final agreed-to price is fair and reasonable."
  • Price analysis looks at the total, without picking apart your cost elements (FAR 15.404-1(b)).
  • Cost analysis looks inside, at the separate cost elements and profit or fee (FAR 15.404-1(c)).
  • Cost realism asks whether you could actually do it for that. On cost-reimbursement contracts it is mandatory (FAR 15.404-1(d)).
  • Our advice: be able to explain your number, not just state it. If a cost is challenged, FAR 31.201-3 puts the burden of proof on you.

What cost realism analysis is

It is the government's check on whether your proposed costs are achievable for the work described.

FAR 15.404-1(d) sets the test. Cost realism analysis asks whether the proposed cost elements are "realistic for the work to be performed," whether they "reflect a clear understanding of the requirements," and whether they are "consistent with the unique methods of performance and materials described" in your proposal.

It sits alongside two other techniques, and the difference between them is worth getting straight.

Price analysis evaluates a proposed price without examining the separate cost elements and profit. Cost analysis does the opposite: FAR 15.404-1(c) describes it as the "review and evaluation of any separate cost elements and profit or fee… as needed to determine a fair and reasonable price." Cost realism goes further again and asks whether the resulting number is achievable.

All of it serves one objective. FAR 15.402 requires contracting officers to "purchase supplies and services from responsible sources at fair and reasonable prices." FAR 15.404-1(a) adds that the point of proposal analysis "is to ensure that the final agreed-to price is fair and reasonable."

Note what is missing from those sentences. Neither says "lowest."

There is also an order of preference for where the data comes from. Where certified cost or pricing data is not required, FAR 15.402 tells contracting officers to seek no additional data at all if the price is based on adequate price competition. Failing that, they look to data already inside the government first, then data from sources other than you, and only then data from you.

That ordering is worth noticing. The government would rather test your price against the market than ask you to open your books.

How the government checks your price, step by step

How the government evaluates a proposed price: price analysis compares the total against competition and history, cost analysis examines the separate cost elements and fee, cost realism tests whether the work can be done for the money, and on cost-reimbursement contracts a probable cost is calculated for each offeror.

How the government checks your price: price analysis, cost analysis, cost realism and probable cost

  1. Price analysis comes first, where competition allows it. FAR 15.404-1(b) lists the techniques, and says plainly that "the first two techniques… are the preferred techniques." Those two are comparing the prices received against each other, and comparing them with previous prices for the same or similar items. Other methods — parametric estimates, published price lists, market research, an independent government estimate — are used where competitive or historical data is unavailable or insufficient.

  2. Cost analysis opens up the elements. Where the total alone cannot settle the question, the evaluator examines the parts: labor, indirect costs, materials, and profit or fee. Our guide to wrap rates covers how those parts fit together on your side of the table.

  3. Above a threshold, the data gets certified. FAR 15.403-4 requires certified cost or pricing data, absent an exception, for pricing actions expected to exceed $2.5 million (the threshold for prime contracts awarded on or after July 1, 2018). Below that, or where an exception applies, the government works from other data.

  4. Cost realism tests whether the number is achievable. FAR 15.404-1(d): "Cost realism analyses shall be performed on cost-reimbursement contracts to determine the probable cost of performance for each offeror."

    It reaches further than that. It may also be used on competitive fixed-price incentive contracts, and "in exceptional cases" on other competitive fixed-price-type contracts. Those exceptional cases include new requirements that may be misunderstood, concerns about quality, and past experience showing that proposed costs have led to quality or service shortfalls.

  5. If a cost is challenged, you justify it. FAR 31.201-3 defines a reasonable cost as one that "does not exceed that which would be incurred by a prudent person in the conduct of competitive business."

    The same section is explicit about who argues the point. Where the contracting officer challenges a specific cost, "the burden of proof shall be upon the contractor to establish that such cost is reasonable."

    Four things bear on that judgement:

    • whether the cost is ordinarily necessary for the business or the contract;
    • whether it reflects sound business practice and arm's-length bargaining;
    • the contractor's responsibilities to the government and others;
    • any significant deviation from the contractor's own established practices.

    That last one matters. Charging this contract differently from how you charge everything else invites a question.

What this means for your business

Here is the part that surprises people. On a cost-reimbursement contract, bidding too low can cost you the award.

Cost realism produces a probable cost for each offeror. If the evaluators conclude you cannot do the work for what you proposed — too few hours, rates that look unachievable, a staffing plan that does not match the scope — they can evaluate you against the higher figure they believe is realistic. Your attractive low number stops being the number you are judged on, and the proposal may also read as a misunderstanding of the requirement.

TechniqueWhat it examinesWhen you will meet it
Price analysisThe proposed price as a whole, not its partsMost competitive buys, especially commercial items
Cost analysisSeparate cost elements and profit or feeWhere price analysis alone cannot establish reasonableness, and where certified data is required
Cost realismWhether the work can actually be done for the moneyMandatory on cost-reimbursement contracts; sometimes on fixed-price incentive and, exceptionally, other fixed-price types

Three mistakes we see often:

  • Treating low as safe. It is safe only where price analysis is the whole test. Where cost realism applies, an unrealistic price is a weakness, not an advantage.
  • Pricing a staffing plan you have not written. Realism is judged against the methods described in your own proposal. If the hours do not match the approach, the two documents argue with each other.
  • Having no explanation ready. The burden of proof sits with you under FAR 31.201-3. "That is our standard rate" is not an explanation of reasonableness.

What to do this week

  1. Check the contract type on anything you are bidding. Cost-reimbursement means cost realism is mandatory. That single fact should change how you build the number.
  2. Reconcile your price to your technical approach. Count the hours implied by your own staffing plan and check they match what you priced.
  3. Write down why each major cost is reasonable, before anyone asks. You are the one who has to prove it.
  4. Know which analysis you are likely to face. On a competitive commercial buy it is usually price analysis. Our price-to-win guide covers positioning within that.
  5. Get your indirect rates straight. Our wrap rate guide and our GSA Schedule labor rates guide cover the build; this article covers how it gets tested. Our guide to proposal mistakes covers the disconnects that show up in review.
Sources (4)
  1. FAR 15.402, Pricing policy — https://www.acquisition.gov/far/15.402 (FAC 2026-01, effective March 13, 2026; accessed November 13, 2026)
  2. FAR 15.403-4, Requiring certified cost or pricing data — https://www.acquisition.gov/far/15.403-4 (FAC 2026-01; accessed November 13, 2026)
  3. FAR 15.404-1, Proposal analysis techniques — https://www.acquisition.gov/far/15.404-1 (FAC 2026-01; accessed November 13, 2026)
  4. FAR 31.201-3, Determining reasonableness — https://www.acquisition.gov/far/31.201-3 (FAC 2026-01; accessed November 13, 2026)

Want help putting this to work for your business? Book a free consultation with Aliff Solutions: https://aliffsolutions.com

This article explains general rules as of November 2026. It is not legal advice, and rules change. Always check the current solicitation and the official sources linked above. We don't guarantee contract awards.

Frequently Asked Questions

What is cost realism analysis?
The government's assessment of whether your proposed costs are achievable. FAR 15.404-1(d) asks whether the proposed cost elements are "realistic for the work to be performed," whether they "reflect a clear understanding of the requirements," and whether they are "consistent with the unique methods of performance and materials described" in the proposal.
When is cost realism analysis required?
It is mandatory on cost-reimbursement contracts. FAR 15.404-1(d) states that "cost realism analyses shall be performed on cost-reimbursement contracts to determine the probable cost of performance for each offeror." It may also be used on competitive fixed-price incentive contracts and, in exceptional cases, on other competitive fixed-price-type contracts.
Can the government decide my price is too low?
On a cost-reimbursement contract, effectively yes. Cost realism analysis produces a probable cost for each offeror, and that is the figure used in the evaluation. An unrealistically low proposal can therefore be assessed at a higher cost, and can also suggest you have misread the requirement.
What is the difference between price analysis and cost analysis?
Price analysis evaluates the proposed price without examining the separate cost elements and profit. Cost analysis is the "review and evaluation of any separate cost elements and profit or fee… as needed to determine a fair and reasonable price" (FAR 15.404-1(c)). Price analysis looks at the total; cost analysis looks inside it.
When do I have to provide certified cost or pricing data?
FAR 15.403-4 requires it, absent an exception, for pricing actions expected to exceed $2.5 million (the threshold for prime contracts awarded on or after July 1, 2018). Exceptions are listed at FAR 15.403-1(b). The head of the contracting activity can also authorize requiring it below the threshold in justified cases above the simplified acquisition threshold.
Who has to prove a cost is reasonable?
You do. FAR 31.201-3 provides that where a contracting officer challenges a specific cost, "the burden of proof shall be upon the contractor to establish that such cost is reasonable." A reasonable cost is one that "does not exceed that which would be incurred by a prudent person in the conduct of competitive business."

Get More GovCon Insights

Subscribe to our weekly newsletter for actionable intelligence on winning government contracts.

Enjoyed this article? Share it.
Share:

Written by

Sana Rehman

Co-Founder and VP, Resources, Aliff Solutions

Aliff Solutions provides quantitative intelligence for government contractors. Our team combines decades of federal contracting experience with advanced analytics to help you win more contracts.

Related Articles

GSA Schedule Pricing: How to Set Competitive Labor Rates in 2026
Pricing StrategyFebruary 14, 20263 min read

GSA Schedule Pricing: How to Set Competitive Labor Rates in 2026

In 2026, GSA pricing is more competitive than ever. Learn how to conduct salary analysis, map labor categories, and set rates that win task orders without sacrificing margin.

gsa-schedulepricinglabor-rates
Read Article
How to Calculate Wrap Rates and Optimize GovCon Pricing
Pricing StrategyFebruary 10, 202610 min read

How to Calculate Wrap Rates and Optimize GovCon Pricing

Wrap rates determine the true cost of every billable hour in government contracting. This guide breaks down fringe, overhead, and G&A components, walks through a complete calculation example, explains typical multipliers around 2.7x, and shows how to benchmark against GSA CALC data.

wrap ratesGovCon pricingindirect rates
Read Article
Photo: Sana Rehman and Sumera Khan of Aliff Solutions review a competitor price chart with a highlighted target range while Haroon Haider looks on, next to the title Price-to-Win Strategies for Federal Contractors.
Pricing StrategyJanuary 20, 20266 min read

Price-to-Win Strategies for Federal Contractors

Master the art and science of competitive pricing in government contracting. Learn how to analyze GSA rates, calculate wrap rates, and develop pricing strategies that maximize both your win probability and profitability.

pricingprice-to-winGSA rates
Read Article

Want help putting this to work?

Talk to our team about your next bid.